16 bar Compressed Air Filter Housing ½” BSP – 54 cfm. Comes complete with element and automatic drain.
Air that is drawn in by the compressor and used by the system can contain dust, dirt, water, oil and other unwanted airborne contaminants – it can compromise production and become a costly system. The FP Series Compressed Air Filters are effective in the removal of solid particles, oil aerosol and water from compressed air systems. Our FP filter series have been tested to ensure that they conform to compressed air requirements and are safe to use. They are treated to prevent corrosion and have an epoxy powder coating to protect them externally. Our filter elements also have a 'push-fit' design making them faster and easier to install in comparison to conventional elements.
X1 Pre-Filter (1 Micron)
Filters for general purpose protection, capable of removing contaminants down to 1 micron, with oil residual present at 0.1mg/m³.
XA Oil Removal (0.01 Micron)
High efficiency coalescing filters, removing oil and water aerosol down to 0.01mg/m³ and extremely small particles to 0.01 micron.
XAC Activated Carbon
High efficiency activated carbon filter for removal of oil vapours and odours. It lowers to a maximum remaining oil residual of 0.003mg/m³ when installed after (XA) grade filter.
For more information please download the FP Series Technical Data sheet.
Please download the Technical Data Sheet for the FP Series Compressed Air Filters here.